Prof. Mustafa GÜDEN

 

PUBLICATIONS

 

A. Tasdemirci, S. Yuksel, D. Karsu, E. Gulturk, I.W, Hall, M. Guden Diatom frustule-filled epoxy: experimental and numerical study of the quasi-static and high strain rate compression behavior Mater. Sci. Eng. A (in press)

 

M. Güden, E. Çelik, A. Hızal, M. Altındiş, S. Çetiner, Effects of Compaction Pressure and Particle Shape on the Porosity and Compression Mechanical Properties of Sintered Ti6Al4V Powder Compacts for Hard Tissue Implantation, Journal of Biomedical Materials Research: Part B - Applied Biomaterials (in press).

 

İ. Tirtom,  M. Güden, H. Yildiz, Simulation of the strain rate sensitive flow behavior of SiC-particulate reinforced aluminum metal matrix composites, Computational Materials Science (in press)

 

L. Aktay, A.F. Johnson, A.K. Toksoy, B.-H. Kröplin and M. Güden Modeling the progressive axial crushing of foam-filled aluminum tubes using smooth particle hydrodynamics and coupled finite element model/smooth particle hydrodynamics Materials & Design, In Press, Corrected Proof, Available online 27 March 2007, 
 

L. Aktay, B.-H. Kröplin, A.K. Toksoy and M. Güden Finite element and coupled finite element/smooth particle hydrodynamics modeling of the quasi-static crushing of empty and foam-filled single, bitubular and constraint hexagonal- and square-packed aluminum tubes Materials & Design,  In Press, Corrected Proof, Available online 20 April 2007, 

A. Taşdemirci, A. Hızal, M. Altındiş, I.W. Hall and M. Güden The effect of strain rate on the compressive deformation behavior of a sintered Ti6Al4V powder compact Materials Science and Engineering: A, In Press, Corrected Proof, Available online 13 May2007, 

 

S. Yüksel, M. Guden, A. Taşdemirci, M. Tanoğlu Effect of aluminum closed-cell foam filling on the quasi-static axial crush performances of glass fiber reinforced polyester composite and aluminum/composite hybrid tubes. Composite Structures, 81 (2007) 480-490.

 

 M. Güden, H. Kavi, Quasi-static axial compression behavior of constraint hexagonal and square-packed empty and aluminum foam-filled aluminum multi-tubes. Thin-Walled Structures 44 (2006) 739–750.

 

M. Guden, H. Kavi, A. K. Toksoy Interaction effect and energy absorption in polystyrene foam filled thin-walled aluminum tubes  J. Materials Science 41 (2006) 6417–6424.

 

 Guden M, Kavi H, Toksoy AK. Predicting energy absorption in a foam-filled thin-walled aluminum tube based on experimentally determined strengthening coefficient. Materials and Design 27 (2006) 263-269.

 

L. Aktay, A K. Toksoy, M. Guden  Quasi-static axial crushing of extruded polystyrene foam-filled thin-walled aluminum tubes:experimental and numerical analysis Materials  and Design 27  (2006)  556-565.

 

A. Şakar, M. Güden Microhardness and Fracture Toughness of Dental Materials Indentation Method Journal of Biomedical Materials Research: Part B - AppliedBiomaterials 76B (2006) 257–264.

 

M. Güden, O. Akil, M. Ciftcioglu, A. Tasdemirci, I. W. Hall Effect of strain rate on the compressive mechanical behavior of a continuous alumina fiber reinforced ZE41A magnesium alloy based composite, Mater. Sci. Eng. A A 425 (2006) 145–155

 

M. Güden, S. Yuksel, Compression behavior of SiC-particulate foams produced by foaming from powder compacts  J. Materials Science 41 (2006) 4075-4084

 

Aidarova SB, Musabekov KB,  Ospanova ZB, Guden M, Foam stabilization in binary solution mixtures of low molecular surfactant and polyelectrolyte,  J. Materials Science 41(2006) 3979-3986.

 

Guden M, Celik E, Akar E, Cetiner S. Compression testing of a sintered Ti6Al4V powder compact for biomedical applications Materials Characterization 54 (2005) 399– 408.

 

K. Toksoy,  M. Güden ‘’The strengthening effect of polystyrene foam filling in aluminum thin-walled cylindrical tubes’’, Thin-walled tubes, 43(2005) 333-350.

 

M Guden, E. Çelik, S. Çetiner, A. Aydın,  Metal Foams for Biomedical Aplications: Processing and  Mechanical Properties Advances in Experimental Medicine and Biology 553(2004)257-266. 

 

D.Şimşek, R. Çiftçioğlu, M. Güden, M. Çiftçioğlu, Ş. Harsa ‘’Mechanical Properties of Hydroxyapatite Composites Reinforced with Hydroxyapatite Whiskers’’, Key Engineering Materials, 264-268(2004)1985-89.

 

Ö. Ç Duvarcı, M. Çiftçioğlu, M Güden, G. Arıkut ‘’Preparation and Microstructural Development of Nanocrystalline Titania and Alumina ‘’ Key Engineering Materials, 264-268(2004)2355-58

 

M.Güden, U. Yıldırım, , I. W. Hall Effect of strain rate on the compression behavior of a woven glass fiber/SC-15 composite, Polymer Testing  23(2004)719-725.

 

A. Tasdemirci, I. W. Hall, B. A. Gama, M. Guden Stress Wave Propagation Effects in two- and three-Layered Composite Materials,  J. Comp. Mater. 38(2004)995-1009.

 

A. K. Toksoy, M. Tanoglu, M. Guden and I. W. Hall The effect of adhesive on the strengthening of aluminum foam-filled circular tubes J. Mater. Science 39 (2004) 1503-1506.

 

S. Elbir, S. Yılmaz, A. K. Toksoy,  M. Güden SiC-particulate aluminum composite foams produced by powder compacts: foaming and compression behavior, J. Materials Science. 38(2003)4745-4755.

 

M Güden ve I. W. Hall Effect of lubricant type on the results of the split Hopkinson pressure bar compression testing at high strain rates, J. Mater. Science Letters, 22(2003) 1533-1535.

 

Ö. Akil, U. Yıldırım, M.Güden, I. W. Hall Effect of strain rate on the compression behavior of a woven fabric S2-glass fiber reinforced vinyl ester composite, Polymer Testing 22 (2003)883 –887.

 

Sergey L.Lopatnikov ,Bazle A.Gama,Md.Jahirul Haque ,Carl Krauthauser John W.Gillespie Jr. Mustafa Guden ,Ian W.Hall Dynamics of metal foam deformation during Taylor cylinder –Hopkinson bar impact experiment Composite Structures 61 (2003)61-71.

 

S. A. Greene, I. W. Hall and M. Güden Improving the energy absorption of closed cell aluminum foams, J. Mater. Letters 21(2002)513-518

 

Hall I. W., Guden M., “Transverse crushing of aluminum foam filled tubes”, Scripta. Mater. 46(2002)513-518

 

Hall, I. W., Ebil, O., Güden, M., Yu C.-J., Quasi-static and dynamic crushing of empty and foam filled-tubes, J. Mater. Sci.,36 (2001) 5853-5860.

 

Hall, I. W. and Güden, M., “High strain rate testing of a Gr/Epoxy model composite,” J. Mat. Sci. Letters, 20 (2001) 897-899.

 

Hall, I. W., Güden, M., ve Yu, C.-J., “Crushing of aluminum closed cell foam:density and strain rate effects”, Scripta. Mater., 43 (2000) 515-521.

 

Güden, M. and Hall, I. W., “High strain rate deformation behavior of a continuous fiber reinforced aluminum metal matrix composite”, Computers and Structures, 76 (2000)139-144.

 

 Güden, M. and Hall, I. W., “High strain rate properties of an SiCw/2124-T6 aluminum composite at elevated temperatures”, Scripta. Mater., 39(1998)261-267.

 

Güden, M. and Hall, I. W., “Dynamic properties of metal matrix composites: a comparative study”,  Mater. Sci. Eng., A242(1998)141- 152.

 

Güden, M. and Hall, I. W., “High strain rate behavior of a SiC particulate reinforced Al2O3 ceramic composite,” Scripta Mater., 38(1998) 667- 674.

 

Güden, M. and Hall, I. W., “High strain-rate compression testing of a short-fiber reinforced aluminum composite,”  Mater. Sci. Eng., A232(1997)1-10 .

 

Güden, M. and Hall, I. W., “Quasi-static and dynamic compression behavior of an FP alumina reinforced aluminum metal matrix composite”,  J. Mater. Sci, 33 (1998)791-797.

 

Güden, M. and Piprek, J., “Material parameters of quaternary III-V semiconductors for multilayer mirrors at 1.5 mm wavelength,” Modelling Simul. Mater. Sci. Eng., 4(1996) 349-357.

 

Güden, M and Karakaya, I., “Electrolysis of MgCl2 with a top inserted anode and an Mg-Pb cathode,” J. Appl. Electrochem., 24 (1994)791-797.

 

Turkish journals

 

Durmus A, Ulku S, Guden M, Otnar FK  Kauçuk/metal yapişma mukavemetinin belirlenmesi Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 10 (2005) 33-37.

 

İnce U, Toksoy M, Güden M, İzmir-Balçova Jeotermal Doğrudan Isıtma Sisteminde Kullanılan St-37 Karbon Çelik Malzemesinin Değişik Akışkan Hızlarındaki Korozyon Davranışı ve Mekanik Özelliklerindeki Değişimler, Tesisat Mühendisliği, 83, 3-12(2005).

 

Güden, M. ve Hall, I. W. High strain rate behaviour of metal matrix composites, Metalurji, Metalurji Mühendisleri Odası, 23, 119, 20-29 (1999)

 

Elbir, S.,  Yılmaz, S. ve Güden, M.,  Kapalı Hücreli  Alüminyum Metal Köpüklerin Üretimi ve Mekanik Özellikleri, (Production and mechanical properties ofclosed-cell aluminium foams) Metalurji, Metalurji Odasi, 23, 120, 35-43 (1999).

 

 

Conferences

 

M. Güden and I. W. Hall, “High strain behavior of a continuous fiber reinforced aluminum metal matrix composite”, NATO Adavanced Study Institute on Mechanics of Composite and Structures, Vol. 3, 355, Troia, Portekiz, Temmuz 12-24, 1998.

 

Hall, I. W., Güden, M.,  and Yu, C.-J., Quasi-static and Dynamic Crushing of an Aluminum Closed-Cell Foam, Trans.  Metall. Soc. Annual Meeting October1988, Chicago.

 

S. Lopatnikov, B. Gama, J. Krauthauser, J. Haque, J. Gillespie, I. W. Hall, M. Guden, Non-equilibrium dynamic deformation and energy absorption of metal foams, Impacts on Composite Structures 2002 Symposium, Virginia Polytechnic Institute and Sate University, Blacksburg Virginia, June 23-28, 2002

 

Güden, M., Closed-cell  aluminum foams: Production, application and mechanical properties, in Foams: Theory and Application Conference, 17-21 May 1999, Ege Universitesi, Turkey (in Turkish)

 

Güden, M., Elbir, S., Yilmaz S., Kapalı Hücreli Alüminyum Kompozit Köpük Metalin Hazırlanması Ve Mekanik Özelliklerinin Belirlenmesi, II. Makine Malzemesi ve İmalat Teknolojisi Sempozyumu, 7-9 Kasım 2001, Manisa Turkey.

 

M. Güden and I. W. Hall, “High strain behavior of a continuous fiber reinforced aluminum metal matrix composite”, NATO Adavanced Study Institute on Mechanics of Composite and Structures, Vol. 3, 355, Troia, Portekiz, Temmuz 12-24, 1998.

 

Hall, I. W., Güden, M.,  and Yu, C.-J., Quasi-static and Dynamic Crushing of an Aluminum Closed-Cell Foam, Trans.  Metall. Soc. Annual Meeting October1988, Chicago.

 

S. Lopatnikov, B. Gama, J. Krauthauser, J. Haque, J. Gillespie, I. W. Hall, M. Guden, Non-equilibrium dynamic deformation and energy absorption of metal foams, Impacts on Composite Structures 2002 Symposium, Virginia Polytechnic Institute and Sate University, Blacksburg Virginia, June 23-28, 2002

 

Güden, M., Closed-cell  aluminum foams: Production, application and mechanical properties, in Foams: Theory and Application Conference, 17-21 May 1999, Ege Universitesi, Turkey (in Turkish)

 

Güden, M., Elbir, S., Yilmaz S., Kapalı Hücreli Alüminyum Kompozit Köpük Metalin Hazırlanması Ve Mekanik Özelliklerinin Belirlenmesi, II. Makine Malzemesi ve İmalat Teknolojisi Sempozyumu, 7-9 Kasım 2001, Manisa Turkey.

 

İ. Tirtom, H. Yılmaz, M. Güden, SiC-partikül takviyeli Alüminyum Metal Matris Kompozitin Statik ve Yüksek Hız deformasyon Davranışlarının Belirlenmesi, 9. Denzli Malzeme Sempozyomu, 8-10 Mayıs 2002, Denzili, Turkey.

 

A. Kaan Toksoy, M, Güden, I. W. Hall, Axial Compression of Aluminum Closed-cell Foam Filled and Empty Aluminum Tubes, Otomotiv Teknolojileri Kongresi, 24-26 Haziran 2002, Bursa Turkey.

 

Çağlar, Ö., Çiftçioğlu, M., ve Güden, M.''Preparation and chracterization of nanocrystalline titania'' 5. Uluslararsı Katılımlı Seramik Kongresi,  3-5 Ekim 2001, İstabul.

 

D. Şimsek, R. Çiftçioğlu, M. Güden, M. Çiftçioğlu, S. Harsa, Mechanical Properties of Hydroxyapatite Composites Reinforced with Hydroxyapatite Whiskers, 6. Uluslararsı Katılımlı Seramik Kongresi,  3-5 Temmuz  2003, İstabul.

 

Ö. Ç Duvarcı, M. Çiftçioğlu, M Güden, G. Arıkut Preparation and Microstructural Development of Nanocrystalline Titania and Alumina  6. Uluslararsı Katılımlı Seramik Kongresi,  3-5 Temmuz  2003, İstabul.

 

M.A.Aydın, S.Çetiner, M.Güden,  H.Yıldız  Use of foam metal in implant design Biomed-2003, 10th
Biomedical Science and Technology Symposium (Guzelyurt, Northern Cyprus, October 10-12, 2003).

 

M. Güden,  Powder Metallurgy processing of aluminium closed-cell foams  9. Denzli Malzeme Sempozyomu, 14-17 April  2004, Denzili, Turkey.

 

H. Kavi, S. Yüksel, M. Tanoğlu, M. Güden, Crushing behavior of aluminum foam fılled aluminum tubes, 9. Denzli Malzeme Sempozyomu, 14-17 April  2004, Denzili, Turkey.

 

A. K. Toksoy, M. Güden, Compression behavior of extruded polystyrene foams, 9. Denzli Malzeme Sempozyomu, 14-17 April  2004, Denzili, Turkey.

 

L. Saatçi, M Güden, Preperation and characterization of  SiC-Whisker/aluminum composite foams 9. Denzli Malzeme Sempozyomu, 14-17 April  2004, Denzili, Turkey.

 

O. Akil, M. Güden, M. Çiftçioğlu, A. Taşdemirci, I. W. Hall, Quasi-ctatic and high strain rate compression behavior of alumina long fiber reinforced Mg metal matrix composite, 9. Denizli Malzeme Sempozyomu, 14-17 April  2004, Denzili, Turkey.

 

M. Güden Foaming and Compression Behavior of SiC-Particulate Aluminum Closed-Cell Foams Produced by Powder Compacts, Syntactic and composite foams, International Engineering Conferences, 1-5 August,Banff, Canada.

 

M. Güden The metallurgical properties of spinal instrumentation materials, Spinal Instrumentation Semposium, 7-10 October, 2004, Antalya, Turkey.

 

M. Güden, Egemen Akar, Emrah Çelik, Sinan Cetiner, Alptekin Aydın The compression behavior of sintered  Ti6Al4V powder compacts, II. National Biomechanics Conferences (with international participitation), 26-27 November, 2004, İstanbul, Turkey.

 

S. Yüksel, M. Tanoğlu, M. Güden, Crushing behavior of Aluminum foam filled composite/metal hybrid tubes, 11. International Materials Symposium, 19-21 Nisan  2006 Denizli, Türkiye.  Denizli Malzeme Sempozyomu, 14-17 April  2006.

 

A. Hızal, E. Akar, M. Güden, Ti6Al4V foams for biomedical applications, 11. International Materials Symposium, 19-21 Nisan  2006 Denizli, Türkiye.  Denizli Malzeme Sempozyomu, 14-17 April  2006.

 

A. Taşdemirci, M. Guden, I. W. Hall, High strain rate reloading compressıon testing of a closed-cell alumınum foam, 13th International Conference on Experimental Mechanics (ICEM13),  lexandroupolis, Greece, July 1-6, 2007.

 

M. Güden, H. Kavi , S. Yüksel, A. Taşdemirci,  Quası-statıc axıal crushıng behavıor of alumınum closed cell foam-filled multı-packed aluminum and composıte/aluminum hybrıd tubes 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, July 1-6, 2007.

 

M. Guden, Sinan Yüksel, Deniz Karsu, Alper Taşdemirci, Aluminum closed-cell foams with ceramic and metallic particle additions Syntactic and Composite Foams II August 5-10, 2007 Davos Switzerland

 

 M. Güden, Elif Gültürk  Fosil nano silika Diatom kabuklarının nano sertlik özellikleri Uluslararası katılılı 18. Ulusal Elektron Mikroskopi Kongresi, Anadolu Üniversity, Eskişehir, Turkey Ağustos 26-29, 2007.

 

Posters and Presentations

 

Materials 2000, University of Delaware, 1996 "High Strain Rate Deformation Behavior of MMCs", A. Kalambur, M. Guden, I. W. Hall

 

Photonics Delaware 2000, University of Delaware, 1996 " New II-V Semiconductor  Compounds for Distributed Bragg Refractors" M. Guden, J. Piprek.

 

Special meeting in Army Research Center, Aberdeen "High Strain Rate  Deformation behavior of a Short Fiber MMC", March, 1996.

 

Solid Mechanics Seminar  Series, Mechanical Engineering Dept., University of  Delaware "High Strain Rate Mechanical Behavior of MMCs", October, 1997.

 

M. Güden, E. Çelik, E. Akar, S. Çetiner, A. Aydın Preparation and Characterization of Porous Ti-6Al-4V sintered Powder Compacts and Foams for Biomedical Applications Syntactic and composite foams, International Engineering Conferences, 1-5 August,Banff, Canada.

 

Newspaper and Magazines

 

Guden M, Sudan Hafif metal köpükler gündemde (Metal foams lighter than water) , Cumhuriyet Bilim Teknik, 886/18, Mart 2004.